ghee@uhccux.uhcc.Hawaii.Edu (Ghee Keong Lim) (08/15/90)
Yesterday, when I tried to boot my ps/2 model 30, which has a 20 megabyte harddisk, I kept receiving this message: 01024 KB OK 163 and then function keys 1 to 10 appears on the bottom of the screen, and the F1 key was blinking all the time. Does anybody knows what is the problem with my computer and how to fix it? (Please pardon me for my ignorance.) In addition, when I use the chkdsk function to check my harddisk, the following message appears: 2 lost allocation units found in 2 chains Convert lost chains to files (Y/N)? What does this means??? Please help me. Any suggestion would be greatly appreciated. :)
bank@lea.ncsu.edu (Dave The DM) (08/16/90)
In article <9011@uhccux.uhcc.Hawaii.Edu> ghee@uhccux.uhcc.Hawaii.Edu (Ghee Keong Lim) writes: >Yesterday, when I tried to boot my ps/2 model 30, which has a 20 >megabyte harddisk, I kept receiving this message: > 01024 KB OK > 163 > and then function keys 1 to 10 appears on the bottom of the >screen, and the F1 key was blinking all the time. >Does anybody knows what is the problem with my computer and >how to fix it? (Please pardon me for my ignorance.) > >In addition, when I use the chkdsk function to check my harddisk, >the following message appears: > 2 lost allocation units found in 2 chains > Convert lost chains to files (Y/N)? >What does this means??? > >Please help me. Any suggestion would be greatly appreciated. :) OK, first the bootup problem. The "01024 KB OK" message means that your computer has checked its RAM and everything is fine. Now the "163" message indicates a problem within the system defaults that are recorded on a chip inside the system unit. I would suggest taking out your Reference Diskette (the copy of the one you got with the machine) and running the automatic configuration. Also check the time and date settings. If you do that and the problem persists, refer it to a qualified microcomputer consultant/repair center. Now...to the "CHKDSK" question. Ever try reading the DOS manual?? "CHKDSK" is trying to tell you that it has found some space on your hard drive that, according to the File Allocation Table, is allocated to some files. However, it can't figure out which ones these are supposedly allocated to. This can come about due to a variety of things, such as turning off the computer before exiting to DOS, or sloppy programs. You can instruct CHKDSK to fix this by giving it the "/F" paramter. That is, by typing in "CHKDSK /F" at your DOS prompt. CHKDSK will allocate those lost places to two (in this case) files: FILE0000.CHK and FILE0001.CHK. You can look at them with something like TYPE to decide what they are and if they're worth keeping. You'll find them, by the way, in the root directory of the hard drive. In doing this, CHKDSK will ask if you really want to save the lost allocation units to files. If you say no, it'll go ahead and repair things, but you'll never get to find out what was in those lost allocation units. Oh, one other thing. The function keys on the bottom with the F1 blinking is just the PS/2s cutesy way of asking you to press F1 so it can continue (it wants you to acknowledge the error it is reporting.) I don't know what was wrong with "Press F1 to continue" like the PC/AT used to say. Dave the DM
martyz@groucho (08/18/90)
In article <9011@uhccux.uhcc.Hawaii.Edu> ghee@uhccux.uhcc.Hawaii.Edu (Ghee Keong Lim) writes: >Yesterday, when I tried to boot my ps/2 model 30, which has a 20 >megabyte harddisk, I kept receiving this message: > 01024 KB OK > 163 I think the 163 just means that your system lost the time & date. You will need to reset them with the startup disk. The message from CHKDSK probably indicates that some files were improperly closed on your hard-disk (like when you turn the power off without exiting an application to DOS). Just let CHKDSK clean-up the mess and you should be fine. -- Marty Zimmerman Computer Services University of Idaho <martyz@ted.cs.uidaho.edu> or <martyz@idui1.bitnet>
webb@bass.tcspa.ibm.com (Bill Webb) (08/23/90)
-> Oh, one other thing. The function keys on the bottom with the F1 -> blinking is just the PS/2s cutesy way of asking you to press F1 so -> it can continue (it wants you to acknowledge the error it is reporting.) -> I don't know what was wrong with "Press F1 to continue" like the PC/AT -> used to say. -> -> Dave the DM I think that the reason that the PS/2 doesn't say (in English) "Press F1 to continue" is that not all customers who buy the PS/2 speak english. Thus it is better to give a picture than to say something that the customer may not understand. Other parts of the system (like the reference diskette) can be customized to the language of the user, but it is hard to produce a lot of different ROM's with messages in different languages. ---------------------------------------------------------------- The above views are my own, not necessarily those of my employer. Bill Webb (IBM AWD Palo Alto), (415) 855-4457. UUCP: ...!uunet!ibmsupt!webb