720323w@aucs.uucp (Bill Wilder) (09/05/90)
I'm having problems on a PS/2 model 70. DOS does not always recognize when a floppy has been exchanged (drive A: 1.44MB) and control/C is sometimes needed to properly read replaced disk. Does the PS/2 not monitor the drive change line or is my unit defective? Thanks
jarom@brahms.udel.edu (Carol Jarom) (09/05/90)
In article <1990Sep4.193333.474@aucs.uucp>, 720323w@aucs.uucp (Bill Wilder) writes: > I'm having problems on a PS/2 model 70. DOS does not always > recognize when a floppy has been exchanged (drive A: 1.44MB) > and control/C is sometimes needed to properly read replaced > disk. > ***** Check the cable from your drive adapter card to the drive and make sure it is firmly connected. Even a slight bit of play in the connection can cause this problem.