adc@cpsvax.cps.msu.edu (Alan D. Cabrera) (02/13/90)
Can anyone tell me what the *.flt files are in the ISCAS '89 test generation benchmark data distribution? Alan Cabrera Computer Laboratory Michigan State University adc@cpsvax.cps.msu.edu
adc@cpsvax.cps.msu.edu (Alan D. Cabrera) (02/26/90)
Can anyone tell me what the *.flt files are in the ISCAS '89 test generation benchmark data distribution? I can not obtain a copy of the proceedings. Would some kind soul send me a copy of the paper that discusses the benchmark data? Alan Cabrera Computer Laboratory Michigan State University adc@cpsvax.cps.msu.edu
bryan@mcnc.org (David S. Bryan) (03/03/90)
In article <6604@cps3xx.UUCP> adc@cpsvax.cps.msu.edu (Alan D. Cabrera) writes: >Can anyone tell me what the *.flt files are in the ISCAS '89 test >generation benchmark data distribution? > The .flt files contain a simplistically reduced fault list for the corresponding .bench files. The format is: node1 /0 /1 where the /0 and /1 indicate stuck-at-zero and stuck-at-one faults on node "node1", respectively. A node name of the form "node1->node2" indicates the fanout branch between nodes "node1" and "node2". The exception is when "node2" is replaced with "PRIMARY_OUTPUT". In this case, a fanout branch from "node1" to a primary output or a flip-flop (scan-mode primary output) is indicated. If you have further technical questions, feel free to send email to bryan@mcnc.org or call 919-248-1432. >I can not obtain a copy of the proceedings. Would some kind soul send >me a copy of the paper that discusses the benchmark data? > I'll see what I can do. Normally, requests for the benchmarks are accompanied by a copy of the paper. Anyone needing the benchmark data can send a request via email to benchmarks@mcnc.org or they are available via anonymous ftp from mcnc.mcnc.org. There is a README file in directory pub/benchmark/ISCAS89. David Bryan bryan@mcnc.org
kundu@arnor.uucp (Sandip Kundu) (03/09/90)
I was not aware of ISCAS-89 benchmark circuits. Are these combinational circuits or sequential circuits or both ? In case I want to aquire the benchmarks what node should I log in to ? userid ? password ? Sandip Kundu (914) 945-1465 -- Disclaimer : Opinions above are mine and not my employers.