[comp.lsi] CIF->PS VLSI geometry description

owens@ogicse.cse.ogi.edu (Steve Owens) (02/07/91)

 Does anyone know of a PD CIF to postscript plotting program or
a Magic ( .mag ) to postscript translator for plotting VLSI layouts
on a laserwriter?

Thanks, Steve Owens

socrates@itd.msstate.EDU (Robert Miller) (02/08/91)

On Feb 7,  7:15am, Steve Owens wrote:
} Subject: CIF->PS VLSI geometry description ( CIF ) to postscript needed
} 
}  Does anyone know of a PD CIF to postscript plotting program or
} a Magic ( .mag ) to postscript translator for plotting VLSI layouts
} on a laserwriter?
} 
} Thanks, Steve Owens
}-- End of excerpt from Steve Owens

You might look at "flea" written by Ed Luke available from 
Mississippi State University.  It drives laser printers, Versatecs,
hp plotters, etc.    send a message to lush@erc.msstate.edu for 
more info.




-- 
=======================================================
All men dream: but not equally.  Those who dream by night in
the  dusty  recesses  of their minds wake in the day to find
that it  was  vanity:  but  the  dreamers  of  the  day  are
dangerous  men, for they may act their dream with open eyes,
to make it possible.
                                      T. E. Lawrence
                                      _The Seven Pillars of Wisdom_
=======================================================
socrates (a.k.a. Robert Miller)         ITD/AuE     
work (601)-325-8159                     1 Research BLVD.
@corona.itd.msstate.edu (130.18.8.160)  Starkville,Ms
                                        39759
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^