tenhagen@grautvornix.informatik.rwth-aachen.de (Klaus ten Hagen) (04/08/91)
We are using CADENCE edge2.1 to design chips which shall be realised with ES2. We want to become a little bit more independent from the actual technology fabricated by ES2 and thus we started to use symbolic layout. Unfortunately symbolic layout is not supported now and hence we are looking for the following items: a) A techfile for 1.5 um (of es2) technology. b) The compactor is written for n-substrate technology, however ES2 uses a p-substrate technology. Is anybody out there with a new set of procedures for the creation of "well-taps" and stuff like that? c) Everytime we placed a "NplusContact" and choose the option row > 1 or column > 1, we got the message "Generation of parameterized cell failed". So how can I generate more than one row or column of contacts? If you can help us, don't hesitate to contact us by email. Thanks in advance. Best regards Siegfried Brittner | Aachen University of Technology brittner@ert.rwth-aachen.de | ERT -5240- phone:+49 241 807632 | Templergraben 55 Fax:+49 241 807631 | D-5100 Aachen -- Klaus ten Hagen | RWTH Aachen tenhagen@ert.rwth-aachen.de | ERT -5240- phone:+49 241 807632 | Templergraben 55 Fax:+49 241 807631 | D-5100 Aachen