andersom@spot.Colorado.EDU (Marc Anderson) (02/26/91)
Well.. the flag green power cord that connects to to my power switch fixture (along with two other wires) got disconnected and I don't know where to attach it.. aargh... is there any way someone could 'explain' to me where exactly it is supposed to go? if you response, please respond in mail also... (to andersom@tramp.colorado.edu) thanks... -marc
thad@public.BTR.COM (Thaddeus P. Floryan) (02/26/91)
In article <1991Feb25.234056.26018@csn.org> andersom@spot.Colorado.EDU (Marc Anderson) writes: >Well.. the flag green power cord that connects to to my power switch >fixture (along with two other wires) got disconnected and I don't know >where to attach it.. aargh... is there any way someone could 'explain' >to me where exactly it is supposed to go? The green wire goes to a screw-hole on the chassis between the hard drive and the power supply and almost along the rear edge. To fasten it, I usually put the screw through the ground lug (on the green wire) and move the wire/lug into position then fasten-down the screw. Visibility CAN be obscured in that area due to the brown and blue wires (from the power supply to the AC assy) and due to the wire(s) to the fan(s). Thad Floryan [ thad@btr.com (OR) {decwrl, mips, fernwood}!btr!thad ]