jeffrey@sci.ccny.cuny.edu (Jeffrey L Bromberger) (04/08/91)
Way back when, I asked if anyone else was using the TEK-emulation copy of async_main (from the STORE!). I'm trying to make this thing go back and forth between text (VT100) and graphics (TEK4014) modes. There were no replies the first time, so this warrants a second post. Well, the help screens tell that a ^_ sent from the host will switch to TEK mode. And indeed, it does. To switch back, it claims, a ^R must be sent. Well, I send the ^R, and nothing happens. Not a thing. I'm running this thru a serial port (known 8-bit channel) at 9600 baud to our VAX. It isn't the speed; it fails at any speed all the way down to 300 baud. The 3b1 is running vanilla 3.51 with fixdisk 2. No other fixes of any sort have been done to this machine. Anybody out there willing to spend a bit of time with adb to figure out what's going on here? Thanks! j -- Jeffrey L. Bromberger System Operator---City College of New York---Science Computing Facility jeffrey@sci.ccny.cuny.edu jeffrey@ccnysci.BITNET Anywhere!{cmcl2,philabs,phri}!ccnysci!jeffrey