jschwarz@csd4.csd.uwm.edu (Joseph V Schwarz) (05/22/91)
Being a relatively new 3b1 user, I would appreciate anyone who could help me on the following: 1) I have managed to install and compile several programs from the osu archives, but I cannot figure out where to put the 'man' files. man keeps reporting 'no input file'. 2) I am trying to transfer files directly from the unix system at school to my 3b1, and I can transfer files using cu's take, but it only seems to work on text files, not compressed or binary files. I cannot make heads or tales of how to use UUCP. Is there a text file that would explain how to go about making the connections? I have a Hayes-compatible modem (2400baud) on tty000, and when I try to call again after hanging up, the computer cannot find the modem; I can't remember the actual error message. Anyone got ideas on this one. FYI - my system is set up as follows (I am not sure if you need to know this, but it never hurts!) 3b1, 2 MB RAM, 67Meg HD, OS 3.51, stock UUCP, although I have HDB UUCP, I haven't installed it yet, GVC 2400 Modem on tty000, straight thru cable, pins 1-7 and 20. As far as I can tell this is how the modem should be set up. Thanks for any help! Joe -- ****************************************************************************** * Joe Schwarz - jschwarz@csd4.csd.uwm.edu * * All FLAMES go directly to /dev/null do not pass GO, do not collect $200! * ******************************************************************************