vancleef@iastate.edu (Van Cleef Henry H) (05/26/91)
I just picked up a TEAC 3.5 floppy with the numbers FD-235F and 112-U and a "p/n 19307321-12" on the nameplate. In the FAQ answers from OSU it mentions setting jumpers, but does not describe which jumpers need to be set. There is a set of Berg jumpers next to the power connector. How should these be configured for the 3b1. The 3.5/5.25 adapter comes with a conversion connector for the floppy cable that also has a Berg jumper set that referes to setting this for "ST: pin 34 on" and "OP: pin 34 off." I would like to know the correct settings before opening up the box. My machine is a (late) 3b1, 2meg/40meg, running o/s and dev/sys 3.51 (not yet patched to 3.51m). -- Hank van Cleef vancleef@iastate.edu Iowa State University, Ames. Ia. tmn!vancleef The Union Institute, Cincinnati, Oh.