darin@mcreate.UUCP (Darin Arrick) (05/05/91)
[ I had a substantial amount of trouble with e-mailing this submitter. ] [ Use the address in the Reply-To: line if you want to contact Darin. ] [ -Dan ] MicroCreations Announces Bar Code Scanner for the Amiga MicroCreations is happy to announce the release of the MicroScanner Model 232 Bar Code Reader, a powerful, compact unit capable of reading the most commonly used bar code symbologies in use today. It plugs into the serial port, and comes with software to interface it with Superbase, a database program from Precision Software. The MicroScanner Model 232 is available with either a wand or a slot (badge) reader input device. Features: o Reads high, medium, or low density bar codes (including dot matrix) o Audible "beep" indicates successful scan o Visual indication (LED) of successful scans o Low power CMOS technology o Switch selectable options : - selectable baud rates - enable/disable each individual bar code symbology - enable/disable audio "beep" - enable/disable CR or CR/LF as termination character - enable/disable check digit - enable/disable display of UPC-A "number system character" - enable/disable interal self-test and diagnostic routines - enable/disable UPC-E expansion o EMI/RFI radiation coating o One year warrany on parts and labor o Designed, manufactured, and tested in the U.S.A. Specifications: o Physical Specifications Dimensions Width : 5 1/8 in. Depth : 5 1/4 in. Height : 1 1/2 in. Shipping Weight : 2 lbs. o Operating Environment 0 to 50 degrees C o Power Consumption 0.5 Watts o Bar Code Specifications Automatic recognition and decoding Codes Supported: Code 3 of 9 (Code 39) Extended Code 3 of 9 (Full ASCII) Interleaved 2 of 5 UPC-A and UPC-E EAN-8 and EAN-13 CODABAR Scan rate : 3 in/sec to 30 in/sec o RS-232 interface Baud Rates : 150, 300, 600, 1200, 2400, 4800, 9600, 19.2K Data bits : 7 or 8 Parity : NONE, ODD, EVEN, MARK Termination characters : NONE, CR (13), TAB (9), CR/LF (13,10) Connector : D-SUB, 25 pin female Signals : Transmit data, Receive data, Data Terminal ready, Frame ground, Signal ground For more information, please contact : MicroCreations Products for the Commodore Amiga P.O. Box 820054 North Richland Hills, TX 76182 (817)281-0612 (817)571-2317 Fax Usenet: darin@mcreate or ...!merch!mcreate!darin --------------------------------------------------------------------------- Darin Arrick, KB5KHR darin@mcreate or ...!merch!mcreate!darin -------------------- US Mail - MicroCreations Running AmigaUUCP v1.08d Products for the Commodore Amiga P.O. Box 820054 // Only Amiga makes North Richland Hills, TX 76182 \X/ it possible. Ma Bell - (817)281-0612 To be added to our mailing list, send me Email with your postal address. --------------------------------------------------------------------------- -- Please see monthly postings for the disclaimer, the introduction, the charter, and submission instructions. Comments to zerkle@iris.eecs.ucdavis.edu. MAIL ALL SUBMISSIONS TO announce@iris.eecs.ucdavis.edu (don't auto-post).