bercov@bevsun.bev.lbl.gov (John Bercovitz) (06/13/91)
I got a 10 mm caliber Lee sizer yesterday. Its quality seems much
improved over that of the two previous Lee sizers I have bought.
I believe this one was drilled with a _sharp_ drill bit rather
than a _dull_ drill bit as before. At any rate, it was easy to
polish up, using 220 grit wet-and-dry on a dowel in a hand drill
followed by 600 grit. Time invested was about 5 minutes. The bullets
come out nice and round and with a mirror finish. They are .4015
diameter rather than the .401 diameter stamped on the die; I presume
this is a result of my polishing job.
JHBercovitz@lbl.gov (John Bercovitz)