ACPS1072@RYERSON <ACPS1072@Ryerson.CA> (04/14/91)
Has anyone out there who owns a digiview with a Panasonic camera
ever lost their lens cap?? Well gosh, golly, gee... I sure have.
Anyways to save whatever money it costs for a new one, I have found an
alternative. Use a lid from your standard, plastic 35mm Kodak film can!!
All you have to do is take an X-acto knife and cut off the inner lip, leaving
the outer lip and the cap intact. Then presto!!! You've got a nicely, snug
fitting lens cap for your Panasonic camera.
If you don't take pictures with a 35mm ask a friend for a Kodak film cap.
If you don't have any friends, ask at a local film developer shop and see
if they have any. Remember... this idea is supposed to be cheap. :->
WARNING: IF you have the dexterity of zero, I suggest you get someone else
that can handle it (who doesn't charge money - think cheap) or
at the very least who has fingers that are expendable. :-]
NOTE: Not responsible for any injuries, bloodshed and that sort of thing
relating (and even not relating) to this project.
Derek Lang<<<<< |
ACPS1072@Ryerson | "Get this clown trained. I want him in the games
Toronto, ON | until he dies playing. Acknowledge."
Canada | - Master Control Program