wangf@athena.ecs.csus.edu (Out of Mind) (06/19/91)
I took a A500 to have the fatter aguns (1meg) enabled. An I had a baseboard ram expander which holds up to 4 megs installed at the time. They told me they ran into problem configuring the ram, Then after the techs finished messing with the A500 it worked fine. (non autoconfige) now when I bought the EXP8000 and installed it, I pluged in the A501 and the computer did nothing but guru. When I unpluged the A501 it worked fine expect that now, I have no clock and only 512K of chip ram.. The EXP8000 is Autoconfigue..Is there a way to get this to work with the A501 or do I have to disable the fatter Agnus? Please Help.. Send messages to me at wangf@ecs.csus.edu....Thanks alot :)
mdeltoro@druco.ATT.COM (DeltoroMA) (06/19/91)
in article <1991Jun19.052558.7713@csusac.csus.edu>, wangf@athena.ecs.csus.edu (Out of Mind) says: > Xref: drutx comp.sys.amiga.advocacy:3568 comp.sys.amiga.programmer:4009 comp.sys.amiga.misc:4200 comp.sys.amiga.hardware:9701 > > I took a A500 to have the fatter aguns (1meg) enabled. An I had a > baseboard ram expander which holds up to 4 megs installed at the time. > They told me they ran into problem configuring the ram, Then after the > techs finished messing with the A500 it worked fine. (non autoconfige) > now when I bought the EXP8000 and installed it, I pluged in the A501 and > the computer did nothing but guru. When I unpluged the A501 it worked > fine expect that now, I have no clock and only 512K of chip ram.. The > EXP8000 is Autoconfigue..Is there a way to get this to work with the > A501 or do I have to disable the fatter Agnus? Please Help.. I have an A500 with 1.3 ROM, 1 meg fatter Agnus, A501 expansion, and the Exp-8000+ memory board with 4 megs of RAM. I have had no trouble at all with this configuration. It has worked fantastic !! Suggestions: 1- Make sure your 68000 chip is plugged in appropriately. 2- Make sure the EXP-8000 board is set to handle 4 megs of memory. 3- The memory must be placed on the correct row(s) in the board. 4- Call PPS for further assistance at 303-825-2943. -- ********************************************************************** Michael 'DT' Del Toro 303-538-1764 AT&T Bell Labs, Denver, CO mdeltoro@druco.COM.ATT