payotte@nro.cs.athabascau.ca (Paul Ayotte) (04/15/91)
Hi netters. I'm having a couple ofproblems with AMax 2.06 and
AMax II in general. I'm trying to print a spreadsheet using an
Imagewriter driver with System 6.0.5. When I try to print I get an
error message saying " Error with Imagewriter " and a requestor
telling me to click ok. The same with the Imagewriter LQ driver.
I have a similar problem with using my ATI 2400etc/e modem and
transfering files to a Mac IIci. When using any protocal ( ie x,y,z
modem) I can recieve files from the Mac but when the Mac sends files
I get nothing but errors. With ZModem the file is recieve until
position 1024 <--- This changes from transfer to transfer, then my
machine starts sending resend (ZRPOS=1024) errors. My machine
continues to send the resend command to the Mac a couple of times
then the transfer continues no motre than 1024 bytes until the
resend error occurs again and the above is repeated.
With X and Y-Modem I get nothing but ACK errors and the transfer
never gets started. The program I'm using is Z-Term v0.85 and System
6.0.5 on a Amiga 2000 v6 with 2 Floppies, GVP Impact8/2Mb with a
Seagate ST-157N and a Mitsubishi Diamondscan.
All of the above works fine using AMax I, all protocals
everything go figure.
I've also noticed that there is apparently a GVP Impact SCSI
<Ver3 driver for AMax II v2.06 . I didn't get this on my update
disk; could some giving person send it to me UUEncoded via EMail.
Thanks folks and don't forget when you mess with Amigans you mess
with the best.
Lat0r.
Paul Ayotte ersys!payotte@nro.cs.athabascau.ca
Edmonton Remote Systems: Serving Northern Alberta since 1982