[comp.sys.amiga.programmer] FFS on BridgeBoard

5scslki@sacemnet.af.mil (5SCSLKI) (03/28/91)

  I understand that there is a procudure and mountlist that will allow
one to use FFS on a 2088 BridgeBoard connected to an Amiga 2000.  If
anyone out there has this information, I would appreciate a reply.
Thanks in advance.

Herosmith

peterk@cbmger.UUCP (Peter Kittel GERMANY) (03/28/91)

In article <49086@nigel.ee.udel.edu> 5scslki@sacemnet.af.mil (5SCSLKI) writes:
>
>  I understand that there is a procudure and mountlist that will allow
>one to use FFS on a 2088 BridgeBoard connected to an Amiga 2000.  If
>anyone out there has this information, I would appreciate a reply.
>Thanks in advance.

If you have a PC-side HD with an Amiga partition on it, then you NEVER
use a mountlist. You partition it with ADISK, format it with
format ... ffs (if you want ffs, note: you need Janus 2.0 for this!)
and mount it with 
djmount ffs

-- 
Best regards, Dr. Peter Kittel  // E-Mail to  \\  Only my personal opinions... 
Commodore Frankfurt, Germany  \X/ {uunet|pyramid|rutgers}!cbmvax!cbmger!peterk