jim@syteke.be (Jim Sanchez) (02/18/91)
I am trying to get a NEC p6 to work with A4 (European Size) paper. The printer was purchased in the US and I do not have the manual describing the DIP switches. Can anyone give me the DIP switch setup and any advice about solving the above problem. I have set the preferences up to use A4 but obviously the printer needs to know about the paper size as well - otherwise when you do a form feed it does not go to the next beginning of form. thanks -- Jim Sanchez | jim@syteke.be (PREFERRED) Hughes LAN Systems | OR uunet!mcsun!ub4b!syteke!jim Brussels Belgium | OR jim@hls.com
peterk@cbmger.UUCP (Peter Kittel GERMANY) (02/19/91)
In article <1793@syteke.be> jim@syteke.be (Jim Sanchez) writes: >I am trying to get a NEC p6 to work with A4 (European Size) paper. >The printer was purchased in the US and I do not have the manual >describing the DIP switches. Can anyone give me the DIP switch setup >and any advice about solving the above problem. This is DIP switch 2 in array SW1. ON means 72 lines (12 inches, DIN A4), OFF means 66 lines (11 inches, US). -- Best regards, Dr. Peter Kittel // E-Mail to \\ Only my personal opinions... Commodore Frankfurt, Germany \X/ {uunet|pyramid|rutgers}!cbmvax!cbmger!peterk