kent@swrinde.nde.swri.edu (Kent D. Polk) (03/27/91)
A few weeks ago I posted a message regarding a problem I had with the DynaCADD
demos on Fish disks 434 & 435. A few days later I received a phone call from
Mr. Alex David - Technical rep. for Ditek.
We discussed the problems I had & Mr. David volunteered to send me a correct
version of the demo.
I recently received the demo & was quite impressed with what I saw. In
addition to the software, Mr. David sent an introduction manual and
other marketing-type information sheets. It looks like the Amiga
finally is getting professional CAD software! The current version does
not have associative dimensioning, automatic hidden line removal,
interactive measurements, an AREXX port, or a couple of other niceties,
but in general, it looks very nice. Mr. David stated that some of this
stuff is already on "the drawing board", but implied it will be some
time before it would be available.
DynaCADD works under 2.0 (they say on the 3000, but I don't have one to test
with), and works in overscan.
I also want to thank Mr. David for his interest in making sure I had a proper
version of the demo. To me, this is a good indication of the type of support
which might be expected from Ditek.
Kent Polk: Southwest Research Institute (512) 522-2882
Internet : kent@swrinde.nde.swri.edu
UUCP : $ {cs.utexas.edu, gatech!petro, sun!texsun}!swrinde!kent