[comp.unix.amiga] IBM bus

bdb@becker.UUCP (Bruce D. Becker) (06/05/91)

In article <1257@cbmger.UUCP> peterk@cbmger.UUCP (Peter Kittel GERMANY) writes:
|In article <14289@ur-cc.UUCP> jea@prodigal.psych.rochester.edu (Joanne Albano) writes:
|>Are there actual IBM bus slots on the A3000?
|
|Yes, there are.
|
|> Is it possible
|>to use IBM compatible cards with a unix machine?
|
|I fear not. You see, the slots are normally NOT connected to the Amiga
|processor, only the power lines are connected. To bring them into life,
|you have to throw in a Commodore Bridgeboard, which carries a whole
|PC (or AT) on a card and also connects to the PC/AT slots and thus
|activates their lines.


	But then one needs software to communicate
	with the bridgeboard - in Amiga Unix, at
	least so far, NO SUCH SOFTWARE EXISTS.
	GRRRRR, SHRIEK, FROTH, etc.


-- 
  ,u,	 Bruce Becker	Toronto, Ontario
a /i/	 Internet: bdb@becker.UUCP, bruce@gpu.utcs.toronto.edu
 `\o\-e	 UUCP: ...!utai!mnetor!becker!bdb
 _< /_	 "Ferget yer humanity, do the poot" - devo

peterk@cbmger.UUCP (Peter Kittel GERMANY) (06/05/91)

In article <106726@becker.UUCP> bdb@becker.UUCP (Bruce D. Becker) writes:
>
>	But then one needs software to communicate
>	with the bridgeboard - in Amiga Unix, at
>	least so far, NO SUCH SOFTWARE EXISTS.
>	GRRRRR, SHRIEK, FROTH, etc.

Oh, huh, yes, until now you can use a bridgeboard only from AmigaDOS.
Perhaps you should put it on your wishlist for the Commodore Unix group
that they perhaps do a port of the Janus software to Amiga Unix.
I don't have any idea how difficult that would be?

-- 
Best regards, Dr. Peter Kittel  // E-Mail to  \\  Only my personal opinions... 
Commodore Frankfurt, Germany  \X/ {uunet|pyramid|rutgers}!cbmvax!cbmger!peterk

rhealey@kas.helios.mn.org (Rob Healey) (06/08/91)

>In article <106726@becker.UUCP> bdb@becker.UUCP (Bruce D. Becker) writes:
>>	But then one needs software to communicate
>>	with the bridgeboard - in Amiga Unix, at
>>	least so far, NO SUCH SOFTWARE EXISTS.
>>	GRRRRR, SHRIEK, FROTH, etc.
>Oh, huh, yes, until now you can use a bridgeboard only from AmigaDOS.
>Perhaps you should put it on your wishlist for the Commodore Unix group
>that they perhaps do a port of the Janus software to Amiga Unix.

	Consider it scribbled down on the wish list!

		-Rob