asklingl@immd4.informatik.uni-erlangen.de (Andreas Klingler) (02/15/91)
Initially I wanted to wait until I have one of these things but since there where quite some requests: I now have the information sheet on this multifunction machine with me, so here we go. ETFax-7 ======= Fax, scanner, printer, copier Type: Desktop-type transceiver Circuit connected: PSTN, PABX Interface: RS-232 Compatibility: CCITT G3 machines Resolution: horizontal: 8 lines/mm Vertical: 3.85 lines/mm (standard) 7.7 lines/mm (fine) Transmission speed: 15 sec. (CCITT No.1 chart in standard mode) Modem speed: 9600/7200/4800/2400 bps Documtent size: Width: 135-222mm Length: up to 1250mm Document feed: Automatic feed, 5 sheets Recording system: Thermal recording Effective recording width: 210mm Dimensions: 304(W)x250(D)x105(H)mm Weight: Approx. 4 kg Link-ET (for link to IBM PC and compatible) ======= Plain-paper printing No paper receiving Journal retrieving and printing Transmission terminal identification Phone book for easy access Auto retry Schedule discount rate transmission Programmable transmission in sequence Delayed memory broadcasting Confidential receiving Fax messagess acces on demand Image storage for reuse and editing Direct PC files to fax distibution For more info: GUIS AMERICA INC. 3675 Placentia Court, Chino, CA 91710 U.S.A Tel: (714) 5 900 801 FAX: (714) 5 901 931 TOLL FREE: 1-800-8 888 605 That's all I know so far. So long. --- Andreas Klingler asklingl@informatik.uni-erlangen.de Hey! Hacker! Leave those lists alone!
kaufman@Neon.Stanford.EDU (Marc T. Kaufman) (02/16/91)
In article <1991Feb15.133815.4374@informatik.uni-erlangen.de> asklingl@immd4.informatik.uni-erlangen.de (Andreas Klingler) writes:
.ETFax-7
.=======
.Compatibility: CCITT G3 machines
.Resolution: horizontal: 8 lines/mm
. Vertical: 3.85 lines/mm (standard)
. 7.7 lines/mm (fine)
Is this standard resolution? I thought G3 was 4 lines/mm or 8 lines/mm.
Is it common for "G3" machines to have "near"-standard resolutions?
Marc Kaufman (kaufman@Neon.stanford.edu)
tnixon@hayes.uucp (02/18/91)
In article <1991Feb15.173104.26348@Neon.Stanford.EDU>, kaufman@Neon.Stanford.EDU (Marc T. Kaufman) writes: > In article <1991Feb15.133815.4374@informatik.uni-erlangen.de> asklingl@immd4.informatik.uni-erlangen.de (Andreas Klingler) writes: > > .ETFax-7 > .======= > .Compatibility: CCITT G3 machines > .Resolution: horizontal: 8 lines/mm > . Vertical: 3.85 lines/mm (standard) > . 7.7 lines/mm (fine) > > Is this standard resolution? I thought G3 was 4 lines/mm or 8 lines/mm. > Is it common for "G3" machines to have "near"-standard resolutions? Yes, this is what T.4 calls for (3.85 or 7.7 lines/mm). -- Toby Nixon, Principal Engineer | Voice +1-404-449-8791 Telex 151243420 Hayes Microcomputer Products Inc. | Fax +1-404-447-0178 CIS 70271,404 P.O. Box 105203 | UUCP uunet!hayes!tnixon AT&T !tnixon Atlanta, Georgia 30348 USA | Internet hayes!tnixon@uunet.uu.net