andras@alzabo.ocunix.on.ca (Andras Kovacs) (05/10/91)
I just made a cable to attach an AAMAZING (no kiddin') VGA monitor to my A310. I connected the R/G/B/GND lines properly, and the CSync (composite sync) pin from the A310 to both the horizontal and vertical sync of the VGA monitor. The picture comes on, but unfortunately it rolls quickly enough that the V-HOLD knob is turned all the way and the picture still rolls. Now I can do *Configure Sync 0 for separate sync, but then there is no picture at all; no wonder, 'cause I don't know the RGB connector pinout in the case of separate sync. Could someone provide me with some help (perhaps from Acorn)? Please? Thanks, Andras PS. I configured Monitortype 3... -- Andras Kovacs Artech Digital Entertainments andras@alzabo.ocunix.on.ca (613) 563-4746 Nepean, Ont. Ottawa, Ontario, Canada