jscott@isis.cs.du.edu (James Scott) (05/19/91)
Hello everyone in NetLand!
We have a problem. We are doing a trial installation of Adv. NetWare 2.15
on an existing Token Ring. The server works fine, and we've been using
tokreui.com and anet3.com from 2.0A and havn't run into a hitch until we
tried using capture. It informed us that we needed the new IPX shell and
net3.com, which we had been putting off generating. To make a long story
short, IPX generated fine and installed fine on a clean DOS station.
Net3.Com, on the other hand, hangs the station when loaded. No change
in TR cards helped, nor did screwing with the drivers. We're running
NW 2.15 on IBM PS/2 model 60's and 80's and co-processors. Anybody got
any ideas on what's goofed?
Thanx in advance!
--
=========================================================================
James Scott jscott@gwhs.colorado.edu
jscott@isis.cs.du.edu
George Washington H.S., Denver gwhs@csn.org