hoyt@plains.NoDak.edu (Dean Hoyt) (02/12/91)
This may have been asked about in the past but I am a recent joiner
of this group. If it has been asked then just point me to the results.
If not here goes.
I am a graduate student at North Dakota State University and am starting
to work with the Motorola 68332 chip. I am using GNU gcc and will be using
GNU gdb. What I am wondering is if anybody has already written the machine
description for the 68332 yet? Also has anybody tried to make gdb work with
the background debugging mode in the 68332. I am planning on working on this
to provide a method of minimum impact debugging on the target system while
using publicly available tools.
I know that Motorola offers a similar system for use on an PC or clone.
The project I am looking at will use UNIX work stations as the support
platform for the processors. I will be using gcc as a cross compiler.
So any information on ports of GNU gcc, gas, and gdb to the 68332 would
be nice to have. If I get responses I will summarize and post the results
to the net.
Thank you in advance.
Dean Hoyt <hoyt@plains.nodak.edu>
uunet!plains!hoyt (UUCP) hoyt@plains.bitnet (Bitnet)
keeper of the pc archive on plains.