d88-hba@nada.kth.se (Harald Barth) (04/02/91)
Hi, I think I could use some help. The story: A friend of mine gave me a present: An old oscilloscope he found on his attric. I was VERY pleased :-) The small problem: It's a kit, I'll have to put the parts together first. It looked like an easy match ( A soldering iron doesn't frighten me). I was optimistic :-| The big problem: I havn't found any sign of a part-list, electrical circuit description or drawing yet. And ( I inspected the box real good) there won't be either. I don't dare to start anything without. I am :-( Question: So if anyone of you did this kit or has any information about how all these zillion parts - nicely packed in plastic bags - are intended to be put together, I would be pleased to share the info (and stand for photocopies etc. of course). Clues: Oscilloscope ite model 255 Conar Instruments Washington, D.C. 20016 (printed on the back plate) Mail me (instead of Re:) if possible. With a faint hope, Harald. d88-hba@nada.kth.se PS: I'm ;-) again. ---------------------------------------------------------------------------- Introducion to smilies: Tilt your head 90deg to the left and look again :-) ----------------------------------------------------------------------------