wb8foz@mthvax.cs.miami.edu (David Lesher) (06/09/91)
Under Ultrucks 3.0/csh, I've got about 40 alias {alia?} that
were in my .cshrc file. But I recently added a couple more.
They don't work. That is, they don't until I 'source .cshrc'
after every login. Then they are fine. These are NOT the last
ones in the alias list - rather they are in the middle.
Here's what I've tried so far:
Put single or double quotes around command
move all alia to the '.alias' file. Add 'source .alias'
command to end of .cshrc
These "fixes" don't change things. I still need a separate, explicit,
source command before these few are recognized.
What am I overlooking?
alias a alias
a al "alias | more"
{ }
a c clear
a ns "nslookup"
a more "less -c"
{ }
nslookup is one of the problem children. The others work fine......
--
A host is a host from coast to coast.....wb8foz@mthvax.cs.miami.edu
& no one will talk to a host that's close............(305) 255-RTFM
Unless the host (that isn't close)......................pob 570-335
is busy, hung or dead....................................33257-0335