bryan@resource.Resource.COM (Bryan M. Beck) (09/22/90)
Help,
This is pretty lenghtly so please bare with me.
I had a 2 node tcp/ip lan running on thin wire using 3Com 3c053
cards running between 1 386/20 running SCO XENIX and 1 486/25 running
SCO UNIX 3.2 in both cases I am using SCO TCP/IP. Lets call there nodes
A and B.
A <---------> B
address
--------
A = 132.147.160.5
B = 132.147.160.10
All communication between A and B works great (ftp,telnet,rcmd,rlogin).
Then I added node C another 386/25 running SCO XENIX with same 3Com and
same TCP/IP. Like so.
A <---------> B <--------> C
addresses
---------
A = 132.147.160.5
B = 132.147.160.10
C = 132.147.160.7
Now here comes the part that stumps me. Systems A and B still work fine
as described above but System C cannot telnet,ftp to machine B. It
just says trying.... and the eventually times out. But System C can
telnet,ftp,ping.... to System A. Also System A and B can telnet,ftp,
ping to C.
Does anyone have any ideas. I could really use some.
Please e-mail all responses.
Thanks,
Bryan
--
Bryan M. Beck Resource Systems
UUCP: osu-cis!resource!bryan Suite 390 2545 Farmers Drive
INTERNET: bryan@resource.com Columbus, Ohio 43235
VOICE: (614) 764-7800 FAX: (614) 764-7850