grants@syacus.acus.oz (Grant Sayer) (09/25/90)
Are there any special settings required on a NetComm123 SA modem for connection to a PC running Xenix ? Tests on the port and cable with another modem allows login but it fails with the NetComm. The symptoms are a long delay until the carrier detect occurrs followed by a Connect 2400 message with a garbage response. I suspect the parity or command modde is echoing characters and conflicting with the line driver (getty). Any suggestions would be appreciated. Please e-mail as I don't read this group frequently. Thanks in Advance Grant Sayer (grants@syacus.acus.oz.au)