[comp.unix.xenix.sco] Xenix Drivers for AT&T IPC-900 Ports Board, and Wangtech Tape.

pbye@ub.d.umn.edu (peter bye) (02/20/91)

Does anyone know where I may obtain (preferably free) drivers for an AT&T
IPC-900 ports card (CTC) and a Wangtek 125MB tape drive under SCO Xenix.
Thanks in advance!

Peter Bye
pbye@ub.d.umn.edu
218-724-9466

basien@pemcom.pem-stuttgart.de (Tillman Basien) (02/22/91)

pbye@ub.d.umn.edu (peter bye) writes:

>Does anyone know where I may obtain (preferably free) drivers for an AT&T
>IPC-900 ports card (CTC) and a Wangtek 125MB tape drive under SCO Xenix.
>Thanks in advance!
Wanktek 125MB is includet in SCO XENIX 2.3.2.
Please look in the release notes page A 30.
Use mkdev tape and enter baseport 0x338 (if you has not changed it), dma
cancal 1 Interrup 5 and type W.
Then, after you has generated a new kernel, boot it with reboot or anyting
else.
In the startup message text, after rebooting you must see the tape. Then insert
a tape and enter the command tape reset. Please check the file /etc/default/tape

		device = /dev/xct0

IPC-900:
	Did you checked the file /usr/sys/io/sioconf.c. Is there no entry for
	this board? Sometimes there is a conflict, then you must edit the
	file and remove all not nessery lines.

This was Tillmann, Stuttgart
-- 
					             basien@PEM-Stuttgart.de
Dipl.-Ing. Tillmann A. Basien           PEM Programmentwicklungsgesellschaft
Vaihinger Str.49, PostBox 810165                      fuer Microcomputer mbH
FRG 7000 Stuttgart 80             voice: +49-711-713045  fax: +49-711-713047
-- 
					             basien@PEM-Stuttgart.de
Dipl.-Ing. Tillmann A. Basien           PEM Programmentwicklungsgesellschaft
Vaihinger Str.49, PostBox 810165                      fuer Microcomputer mbH
FRG 7000 Stuttgart 80             voice: +49-711-713045  fax: +49-711-713047

paul@pilikia.pegasus.com (Paul Telles) (03/04/91)

In article <925@ub.d.umn.edu> pbye@ub.d.umn.edu (peter bye) writes:
>Does anyone know where I may obtain (preferably free) drivers for an AT&T
>IPC-900 ports card (CTC) and a Wangtek 125MB tape drive under SCO Xenix.
>Thanks in advance!
>
>Peter Bye
>pbye@ub.d.umn.edu
>218-724-9466

I would be interested in drivers for the AT&T IPC-802 (CTC) under SCO
XENIX 386 2.3.2.  Maybe somebody could add support under FAS?

				--Paul
-- 
 _ __            _
' )  )          //   "I'm the last survivor of a dead culture, and I don't
 /--' __.  . . //     really belong in the world anymore. And in some ways
/    (_/|_(_/_</__    I feel I ought to be dead."