lee%gdc.portal.com@fernwood.mpk.ca.us (Seng-Poh Lee, Speedy) (03/23/91)
From MAILER-DAEMON@gnu.ai.mit.edu Wed Mar 20 22:46:22 1991
Received: from pogo.gnu.ai.mit.edu by albert.gnu.ai.mit.edu (5.65/4.0) with SMTP
id <AA07134@albert.gnu.ai.mit.edu>; Wed, 20 Mar 91 22:46:18 -0500
Received: by pogo.gnu.ai.mit.edu (5.65/4.0)
id <AA02214@pogo.gnu.ai.mit.edu>; Wed, 20 Mar 91 22:46:43 -0500
Date: Wed, 20 Mar 91 22:46:43 -0500
From: MAILER-DAEMON@gnu.ai.mit.edu (Mail Delivery Subsystem)
Subject: Returned mail: Host unknown
Message-Id: <9103210346.AA02214@pogo.gnu.ai.mit.edu>
To: splee@gnu.ai.mit.edu
Status: R
----- Transcript of session follows -----
550 JBANKERT@SUVM.BITNET... Host unknown
----- Unsent message follows -----
Received: by pogo.gnu.ai.mit.edu (5.65/4.0)
id <AA02211@pogo.gnu.ai.mit.edu>; Wed, 20 Mar 91 22:46:43 -0500
From: splee@gnu.ai.mit.edu (Seng-Poh Lee, Speedy)
Message-Id: <9103210346.AA02211@pogo.gnu.ai.mit.edu>
Subject: Checkmail
To: JBANKERT@SUVM.BITNET
Date: Wed, 20 Mar 91 22:46:42 WET
Return-Receipt-To: splee@gnu.ai.mit.edu
X-Mailer: ELM [version 2.3 PL0]
THis is checkmail. I received several messages from you today and replied. I had
also replied to your previous mail, but it bounced. If you didn't get my mail
today, let me know at lee%splee.uucp@hsi.com
Right now, the best e-mail address for me would be;
lee%gdc.portal.com@fernwood.mpk.ca.us with a cc to lee%splee.uucp@hsi.com
Please ack to both addresses.
Seng-Poh Lee
From gdc!lee@nova.unix.portal.com Fri Mar 22 17:51:45 1991
Received: from apple-gunkies.gnu.ai.mit.edu by albert.gnu.ai.mit.edu (5.65/4.0) with SMTP
id <AA04306@albert.gnu.ai.mit.edu>; Fri, 22 Mar 91 17:51:42 -0500
Received: from portal.COM by apple-gunkies.gnu.ai.mit.edu (5.65/4.0) with SMTP
id <AA26735@apple-gunkies.gnu.ai.mit.edu>; Fri, 22 Mar 91 17:52:51 GMT
Received: by nova.unix.portal.com (3.1.18.162)
id m0jJv0M-0000oXC; Fri, 22 Mar 91 14:54 PST
Received: by portal.unix.portal.com (1.119)
id AA24195; Fri, 22 Mar 91 14:54:41 PST
Message-Id: <9103222254.AA24195@portal.unix.portal.com>
Received: by gdc.portal.com (DECUS UUCP w/Smail);
Fri, 22 Mar 91 17:35:35 EDT
Date: Fri, 22 Mar 91 17:35:35 EDT
From: Seng-Poh@gnu.ai.mit.edu, Lee@portal, Gen@gnu.ai.mit.edu, DataComm@portal,
+1 203 758-1811 <lee@gdc.portal.com>
To: splee@gnu.ai.mit.edu
Subject: vpix posting
Status: R
I am having some problems with VPix regarding my B: drive. I have a
1.2M 5 1/4" A: drive and a 1.44M 3 1/2" B: drive. My cmos
configuration is set up that way. In the users vpix.cnf, I set A: to
/dev/rfd096s15 and B: to rfd1135s18 but everytime I bring up vpix, it
always say General Failure on drive B:. I can access drive B: fine
from Xenix, and A: drive works fine under vpix. Any suggestions?
Now, heres the funny thing. When I use a DOS utility under vpix to look
at my cmos configuration, it tells me I have two 1.2M drives! What gives?
Could that be my problem, and if so, how do I get vpix to correctly
pick up my cmos values.
On another unrelated issue, is there any way I can make vpix boot from
a psuedo D: drive instead of C:? The way it is now, vpix takes the C:
drive, which means I can only access my DOS partiton C: drive as D: or
higher. This kind of messes up all my programs configuration, batch
files etc!
TIA for any help.
-----
Seng-Poh Lee Work: lee@gdc.portal.com
Technology Center ...!uunet!portal!gdc!lee
General DataComm Ind. Inc. Home: lee%splee.uucp@hsi.com
Middlebury, CT ...!uunet!hsi!splee!lee
+-------------------------------------------------------------------------+
| |
| T H I S S P A C E F O R R E N T |
| |
+-------------------------------------------------------------------------+