jdr@sloth.mlb.semi.harris.com (Jim Ray) (03/12/91)
Unfortunately, our local dec support people seem to have absconded with the manuals on the printserver20. So, a couple of questions: 1) Can the options for double sided printing be enabled via posctscript commands? 2) Does anyone have a list of printer options that are controlled via postscript? Thanks, -- Jim Ray Harris Semiconductor Internet: jdr@semi.harris.com PO Box 883 MS 62B-022 Phone: (407) 729-5059 Melbourne, FL 32901
jdr@sloth.mlb.semi.harris.com (Jim Ray) (03/15/91)
I finally was able to set the correct postscript parameter to select the 11 x 17 tray( it is the second tray - but is labeled 8.5 x 14 ? ). However, when I print ( EVERY TIME ) the paper jams. When I open up the printer back, it looks like there is no jam, just sitting there waiting to make it over the top roller ( out to the output tray ). Mechanically everything looks perfect, it just doesn't make it out ( ends up with a jam in region 1 ). Normal paper ( 8.5 x 11 ) works just fine. Does anyone out there use the printer for printing larger format documents? -- Jim Ray Harris Semiconductor Internet: jdr@semi.harris.com PO Box 883 MS 62B-022 Phone: (407) 729-5059 Melbourne, FL 32901