muhammad@chaos.utexas.edu (Muhammad Pervez) (05/09/91)
Hi everyone!
We have accidently overwritten our *very* important data
tapes! Please help.
We have a 4D/20 machine running IRIX 3.3.1 (SYSV3) with a tape
drive. We use high density 150MB tapes ( 3M DC6150 ).
The person who did the backup used the following commands.
He was intending to append some new files to the existing data.
mt rewind /* rewind magnetic tape */
mt -t /dev/nrtapens feom /* to goto end of medium */
tar cvf /dev/nrtapens my_new_files /* using Gnu tar */
mt rewind
The problem is that 'mt -t /dev/nrtapens feom' command did NOT put
the tape to the end of medium and therefore the tar command started
copying the new files from the beginning of the tape!
We have encountered this very same problem a couple of times before.
At that time it was considered to be a bug in the software. Then
it was considered to have been fixed in the system that we are
currently using. ( IRIX 3.3.1 )
My first question is has any other person out there
encountered the same problem. If so what was the cause. Is it
a software problem (perhaps in the tape driver) or is it more likely
a hardware problem (maybe the tape drive is not communicating with
the driver as it should have been).
Secondly I am willing to go thru any kind of trouble in
order to retrieve the data if possible. Theoratically the part of
data that has not been overwritten should still be on the tape.
We just can't access it using Tar. Now question is how can I
restore that data?. I don't know what the best way of recovering
the data is. Is there a utility out there that can allow
me to scan the tape and read all the data BYTE BY BYTE. This might
be helpful and I might be able to restore the data that has not
been overwritten.
Thirdly what is the best way to append new files to the
existing files on the tape. What is a very safe way to go to the
end of medium. I know that we can go thru our save sets (or backup
blocks) one by one and when we get the error message that there
are no more blocks left on the tape. Is there a better way around
this problem. Has anybody out there written a utility that can
do these kinds of (or better and) safer things to go to the end of
medium.
I will really appreciate your help. I really would like
to recover the lost data if possible. Also I would like to set
up a very safe way to do the backups of our experimental data that
other people in our lab can rely on so that this kind of thing
will never happen again. So please let me know the best startegy
to append the files.
Waiting to hear about any help that I can get!
Muhammad Pervez.
<><><><><><><><><><><><><><><><>
<> Muhammad Shahzad A Pervez <>
<> <>