[comp.unix.sysv386] Mixture of ISC 2.0.2 and 2.2 system softwares

paine@fungus.dec.com (Willy Paine) (10/12/90)

Cc: paine (Willy Paine)
 
 
My story on installing over 1023 cyclinder hard drive is not over yet
and it is really long story but I make it short.
 
Right now I am running ISC Unix 2.2 in my Compaq 386's 300 megB hard 
and I want to replace this with 650 megB SpeedStor and Adaptec controller.
 
I could NOT install or upgrade 2.2 in new harddrive and instal program
has bug on trouble with moving or writing files into new hard disk.
 
I had NO trouble installing version 2.0.2 in new hard disk and I may 
have to face some complex problems on "downgrade" my system from 2.2 
to 2.0.2.   
 
MY QUESTION:  Can I mix 2.0.2 (boot, cores and kernals) with 2.2 
softwares (networks, software development)?   I like 2.2 but disk 
space is my top priority right now.    Can I mix version 2.0.2 boot,
and cores with version 2.2 kernals?
 
I tried really hard to persuade ISC Tech to trash install program and
replace with 2.0.2 type install.  ISC told me some wierd things to
try to fix installation problem.  For example, v2.2 install dont work
with >1024 cycl and 16 bits VGA unless this replaces with 8 bits video
card.  I have tried this but no luck.
 
ISC gave me official statement about new release 2.2.1 due November
and it does not say about going to fix the problem with my new hard
drive but I am told that ISC is NOT going to fix inode problem in 2.2.1 
because ISC could not produce inode bug!!!
 
Thank you for your time and I am still trying to install 2.2 in new
hard drive.
 
willy
 

ilan343@violet.berkeley.edu (Geraldo Veiga) (10/12/90)

In article <9010111913.AA15356@decpa.pa.dec.com> paine@fungus.dec.com (Willy Paine) writes:
>Cc: paine (Willy Paine)
> 
> 
>My story on installing over 1023 cyclinder hard drive is not over yet
>and it is really long story but I make it short.
> 
>Right now I am running ISC Unix 2.2 in my Compaq 386's 300 megB hard 
>and I want to replace this with 650 megB SpeedStor and Adaptec controller.
> 
>For example, v2.2 install dont work
>with >1024 cycl and 16 bits VGA unless this replaces with 8 bits video
>card.  I have tried this but no luck.
> 
I tried ISC 2.2 on a system with a Maxtor XT-4230 (1222 cyls),  Adaptec
ACB 2223B-8 and a Paradise 1024 (a 16-bit VGA card).  Installed fine.

larry@nstar.uucp (Larry Snyder) (10/12/90)

paine@fungus.dec.com (Willy Paine) writes:

>ISC gave me official statement about new release 2.2.1 due November
>and it does not say about going to fix the problem with my new hard

what bugs/features will 2.2.1 address?

-- 
       Larry Snyder, Northern Star Communications, Notre Dame, IN USA 
 {larry@nstar, uunet!sco!romed!nstar!larry, nstar!larry@ndmath.math.nd.edu}
                     backbone usenet newsfeeds available
         Public Access Unix Site (219) 289-0282 (5 high speed lines)

larry@nstar.uucp (Larry Snyder) (10/12/90)

ilan343@violet.berkeley.edu (Geraldo Veiga) writes:

>I tried ISC 2.2 on a system with a Maxtor XT-4230 (1222 cyls),  Adaptec
>ACB 2223B-8 and a Paradise 1024 (a 16-bit VGA card).  Installed fine.


I also am running ISC 2.2 on drives > than 1024 cylinders..
I also have a 16 bit ATI VGA wonder card -


-- 
       Larry Snyder, Northern Star Communications, Notre Dame, IN USA 
 {larry@nstar, uunet!sco!romed!nstar!larry, nstar!larry@ndmath.math.nd.edu}
                     backbone usenet newsfeeds available
         Public Access Unix Site (219) 289-0282 (5 high speed lines)

paine@fungus.dec.com (Willy Paine) (10/13/90)

Cc: decwrl::"comp.unix.sysv386.usenet"
 
 
Hi
 
> 
> That's also what I was finally told to try -- that I should install
> my 16-bit VGA card on a 8-bit slot for the instalation procedure and
> after installion moving it back to a 16-bit slot. However, I haven't
> tried it, yet.  Actually, I am not going to try it
> until either I am assured that it will work or my system fails. It is
> a real pain to install the whole thing. 
 
I dont blame you and installing 2.2 on >1024 gives me hell night once or
twice a week for two months!!!   Yes, I am told about switching VGA but
I did not know about putting 16 bits card in 8 bits slot....
 
> 
> What is this inode bug?
> 
 
AT&T already fix this inode bug but ISC have never fixed this at all.
See FAQ on 386 based Unix but I can send you one if you miss FAQ message.
I can get you inode bug fix program which is very small.  B News program
often causes file system running out of inodes and this causes alot of
interruptions on mailing and processing news.  C News never causes any
problem at all but I prefer B News over C News because B News is very
stable and easy to debug.  After switching back to B News, it took me
a week before I got screaming error messages on running out of inodes.
 
I have tried to install 2.0.2 on test machine and then restore this from
tape backup containing 2.2 files but this reboots itself infinitely!!
 
Have you tried 2.2 Kernal mixing with 2.0.2 boot, instal and core?
 
willy