libove@libove.det.dec.com (Jay Libove) (10/15/90)
I built FAS 2.07 on a SCO 3.2.0 box, and though it builds and runs, the phone does not get hung up and the line re-set at the end of a call (e.g. uucp will get to its scheduled time, dial out, complete the call... and the line will hang there). Changing the modes on the devices to assorted values only made the situation worse. The values that worked best, and generated the above mentioned results, were the defaults recommended by the documentation. Has anyone got FAS (any version) working well under SCO Unix 3.2.0 ? B.T.W. My serial card is a subset of an AST Advantage! 16-bit card, the system is a 386-SX generic far-east clone, and the serial port chips on the card are listed in the FAS manual as being supported. Thanks in advance... -- Jay Libove libove@libove.det.dec.com Digital Equipment Corporation decwrl!libove.det.dec.com!libove Detroit ACT/Ultrix Resource Center Opinions? They're mine, mine, all mine! Farmington Hills, Michigan and D.E.C. Can't have 'em!