jdeitch@jadpc.cts.com (Jim Deitch) (10/13/90)
Does anyone know how to specify a protocol to ISC 2.2 uucp?
I want it to use the t protocol instead of the g protocol on a local
connection, but can't remember how.
Thanks,
Jim
--
UUCP: {nosc ucsd hplabs!hp-sdd}!crash!jadpc!jdeitch
ARPA: crash!jadpc!jdeitch@nosc.mil
INET: jdeitch@jadpc.cts.comjbm@celebr.uucp (John B. Milton) (10/18/90)
In article <17@jadpc.cts.com> jdeitch@jadpc.cts.com (Jim Deitch) writes: >Does anyone know how to specify a protocol to ISC 2.2 uucp? > >I want it to use the t protocol instead of the g protocol on a local >connection, but can't remember how. system time;r Device,p;c baud phone ^ ^ ^ | | `-- class | `---- protocol set `------------- max retry time, for linear back-off You can find out what protocols are available by polling the machine you're interested in with uucico in debug mode (-x5): ... Login Successful: System=osu-cis msg-ROK Rmtname osu-cis, Role MASTER, Ifn - 6, Loginuser - jbm rmesg - 'P' got Pgextf ^^^^^ protocols offered wmesg 'U'g ^ we want g Proto started g *** TOP *** - role=1, setline - X ... You can poll your own machine to find out what protocols YOU support. BTW, what is the "t" protocol anyway? The ,p;c stuff after the device name can go in the Systems or the Devices file NOTE: if you are using a Telebit with uucp spooffing, the TB WILL ONLY DO g protocol!! John -- John Bly Milton IV, jbm@uncle.UUCP, n8emr!uncle!jbm@osu-cis.cis.ohio-state.edu (614) h:252-8544, w:469-1990; N8KSN, AMPR: 44.70.0.52; Don't FLAME, inform!