heiko@uwesa.hanse.de (Heiko Weber jun.) (01/20/91)
Hello anyone ! I have a problem with my ESIX X-windows, (ESIX Version 5.3.2 Rev. D). After the installation of TCP/IP, X11 r3, (included xconfig: Xhrc, ser. mouse) I get the following message after starting X with xinit : giving up. xinit: Interrupted system call (errno 4): unable to connect to X server I think, it is not a problem with the permissions, because as "root" there are no differences. Maybe, the problem is, that I have no ethernet- card installed, but during the boot, /etc/netdaemon prints the following messages, I assume, the pseudo pln-driver work's fine. netdaemon: Entry netdaemon: Open /dev/lan0 netdaemon: Open of /dev/lan0 failed netdaemon: Open /dev/lan1 netdaemon: Open of /dev/lan1 failed netdaemon: Use pseudo LAN PLN_DRIVER netdaemon: Open /dev/ip0 netdaemon: Open /dev/ip1 netdaemon: Open /dev/clnmux netdaemon: Open /dev/clnudpm netdaemon: I_PUSH ippln on /dev/lan0 netdaemon: I_LINK /dev/lan0 under /dev/ip0 netdaemon: I_PUSH tcp on /dev/ip0 netdaemon: I_LINK /dev/ip0 under /dev/clnmux netdaemon: I_PUSH udp on /dev/ip1 netdaemon: I_LINK /dev/ip1 under /dev/clnudpm netdaemon: : Streams chain completed. any idea ? Heiko -- | Heiko Weber jun. | heiko@uwesa.hanse.de | Germany | | -----------------------------------------------------| | please keep your mail small, I'll have to pay for it.|
bill@unixland.uucp (Bill Heiser) (01/26/91)
In article <0heiko%664229830@uwesa.hanse.de> heiko@uwesa.hanse.de (Heiko Weber jun.) writes: >Hello anyone ! > >I have a problem with my ESIX X-windows, (ESIX Version 5.3.2 Rev. D). After >the installation of TCP/IP, X11 r3, (included xconfig: Xhrc, ser. mouse) I >get the following message after starting X with xinit : > > giving up. > xinit: Interrupted system call (errno 4): unable to connect to X server I don't know about the netdaemon messages you described -- but the xinit problem means you need to run '/usr/bin/X11/xconfig' (as root). Bill -- home: ...!{uunet,bloom-beacon,esegue}!world!unixland!bill bill@unixland.uucp Public Access Unix - Esix SYSVR3 508-655-3848(12/24) 508-651-8723(12/24/96-HST) 508-651-8733(12/24/96-PEP-V32) other: heiser@world.std.com