brando@uicsl.csl.uiuc.edu (Brandon Brown) (03/06/91)
On pages 251-252, the ISC "Unix System Maintenance Procedures" Guide gives the suggested settings for the Telebit TrailBlazer PLUS modems. A couple of the settings they tell you to set will return an error on the modem. The two I get errors on are: ATX3 ATS51=254 I understand that I may not have the PLUS series of modems, so what should I be using in place of these? The ATX3 setting I simply blew off, but the ATS51 I set to 255. So far everything works like a top answering the phone at 2400 baud, but I don't have a local number for another Trailblazer to see if it will do 19,200. How would you suggest I test it? Any numbers? Thanks alot! Brandon
gandrews@netcom.COM (Greg Andrews) (03/07/91)
In article <1991Mar6.152028.3748@ux1.cso.uiuc.edu> brando@uicsl.csl.uiuc.edu (Brandon Brown) writes: >On pages 251-252, the ISC "Unix System Maintenance Procedures" Guide gives >the suggested settings for the Telebit TrailBlazer PLUS modems. > >A couple of the settings they tell you to set will return an error on >the modem. The two I get errors on are: > > ATX3 > ATS51=254 > >I understand that I may not have the PLUS series of modems, so what should >I be using in place of these? > The version 3 firmware had both of those settings, and it was the first version with complete support for Unix things (like uucp transfers). Type "ATI3" and find out what version of firmware you have in your modem. Then call Telebit tech support. They can tell you what kinds of features your modem currently supports, and can give you a number for testing PEP connections. The number is 1-800-TELEBIT. -- .-------------------------------------------. | Greg Andrews | gandrews@netcom.COM | `-------------------------------------------'