ralfi@pemcom.pem-stuttgart.de (Ralf U. Holighaus) (03/21/91)
Has anyone written a WORKING dialer program for SCO UNIX 3.2.2 to use
uucp with a 9600 V.32 MNP5 modem? How shell I configure uucp with it?
Actually, its an ACEX 9600 Modem.
Regards & Thanks in advance
Ralf.
--
PEM Programmentwicklungsgesellschaft | Ralf U. Holighaus
fuer Microcomputer mbH | Technical Support
PO-Box 810165 D-7000 Stuttgart 80 Germany | holighaus@pemstgt.PEM-Stuttgart.de
VOICE: x49-711-713045 FAX: x49-711-713047 | ..!unido!pemcom!ralfi mikes@iuvax.cs.indiana.edu (Michael Squires) (03/22/91)
In article <1134@pemcom.pem-stuttgart.de> ralfi@pemcom.pem-stuttgart.de (Ralf U. Holighaus) writes: >Has anyone written a WORKING dialer program for SCO UNIX 3.2.2 to use >uucp with a 9600 V.32 MNP5 modem? How shell I configure uucp with it? I found it very easy to get a new modem working using /usr/lib/uucp/Devices to point to an entry in /usr/lib/uucp/Dialers. My TB is locked at 19200 but I need to change parameters when dialing 2400 bps modems, so I have 19200 and S19200 as entries in Devices that point to telebitpep and telebitslow in /usr/lib/uucp/Dialers. There are enough samples in Dialers so that modifying or writing one is quite simple. The only problem is that Dialers does not allow you to handle modem error messages intelligently, and uulog won't return very useful error information. -- Mike Squires (mikes@iuvax.cs.indiana.edu) 812 855 3974 (w) 812 333 6564 (h) mikes@iuvax.cs.indiana.edu 546 N Park Ridge Rd., Bloomington, IN 47408 Under construction: mikes@sir-alan.cica.indiana.edu