splee@gnu.ai.mit.edu (Seng-Poh Lee, Speedy) (03/26/91)
My previous post got really messed up, so here goes again; I am having some problems with VPix regarding my B: drive. I have a 1.2M 5 1/4" A: drive and a 1.44M 3 1/2" B: drive. My cmos configuration is set up that way. In the users vpix.cnf, I set A: to /dev/rfd096s15 and B: to rfd1135s18 but everytime I bring up vpix, it always say General Failure on drive B:. I can access drive B: fine from Xenix, and A: drive works fine under vpix. Any suggestions? I'm running Xenix 2.3.2 with VP/ix 1.1. Now, heres the funny thing. When I use a DOS utility under vpix to look at my cmos configuration, it tells me I have two 1.2M drives! What gives? Could that be my problem, and if so, how do I get vpix to correctly pick up my cmos values. On another unrelated issue, is there any way I can make vpix boot from a psuedo D: drive instead of C:? The way it is now, vpix takes the C: drive, which means I can only access my DOS partiton C: drive as D: or higher. This kind of messes up all my programs configuration, batch files etc! TIA for any help. Seng-Poh Lee splee@gnu.ai.mit.edu