geo@hemlock.uucp (George Aguiar) (04/13/91)
In trying to add a second SCSI HD to my system I get the following error message during boot up: aha_drvinit: aha_init unable to get capacity for drive 1 (1:0), marked offline I think the SCSI bus is terminated correctly, the AHA1542 and the last drive on the SCSI cable have terminators installed. The other drive, 0, isn't terminated. My information on the Connor Peripherals 104M drive is less than complete. It says that jumper e4 is parity but doesn't say if the jumper should be installed or removed for parity enable. Anyone have better documentation? Any other things I should check? Thanks, hemlock!geo@encore.com -- -- George Aguiar -- -- George Aguiar