hot@integow.uucp (Roland van Hout) (04/29/91)
Hello world, Since about 3 weeks I'm running Esix V.3.2 Rev D., because I have a T1000 modem I immediatly put fas208 on the system, installed it linked the kernel and everything seemed fine. The last 10 days I took a closer look at the modem performance and noticed that the speed that used to be between 600-900 cps dropped down to 300-450 cps. The communication also makes very long pauses between the uucp spoofing, just like under Interactive without the fas and 16550's. Before I used Interactive with the fas208, my card contains 3 ports and 3 16550's, Interrupts all set the same as for Interactive, the driver is configured as under ix, port 0 is set to NOFIFO because I use a mouse. Is this some kernel priority that has to be changed, or did I foul it up when I installed it, or what? Any ideas Roland hot@integow.uucp -- UUCP: ..!uunet!mcsun!hp4nl!integow!hot or hot@integow.UUCP Roland van Hout, Sr. software engineer, Integrity software consultants, Pelmolenlaan 2, 3447 GW Woerden, Netherlands, tel +31 3480-30131, fax +31 3480-30182