udalski@astro.princeton.edu (Andrzej Udalski) (05/28/91)
[ I am posting this message for my friend who does not have access to the Usenet. Please answer to him directly by e-mail: FOK11@PLEARN.BITNET ] I have a 386/33 machine running ISC 2.02 Unix. It is in a small LAN consisting of a SUN Sparc1+ and PCs. I am a novice in 386 Unix world so please forgive if my problems are trivial. 1. 386 sees Sun disk through NFS. Unfortunately, when I attempt to change directory on the NFS disk, try to write a file and especially I use vp-ix on that disk, the command hangs and on Sun console the following message appears: rfs_read: attempt to read from non-file many, many times. This happens on a deeper level than the mounting point of the NFS-disk. From the opposite side, everything works fine and Sun sees 386 disk without any problems. 2. The 'batch' and 'at' commands don't work from the console and virtual terminals. When fail they return the message: Sh: Bad ulimit. However they do work when one is logged on either through rlogin or telnet (?!!!) 3. I can't configure 'rsh' and 'rexec' services properly. Although inetd is running, rshd + rexecd are uncommented in /etc/inetd.conf, hosts.equiv contains all necessary info, rsh form Sun (or PC) returns without any action; rexec gives the following output: Byte != 0 [1] we're goin in ... Login incorrect (though userid and password are correct for sure). Thank you in advance for any help. As we don't have access to the News please answer by e-mail. Michal Szymanski Warsaw University Observatory Al.Ujazdowskie 4 00-478 Warszawa POLAND e-mail: FOK11@PLEARN.BITNET
Andrzej.Udalski@sunbrk.FidoNet.Org (Andrzej Udalski) (05/28/91)
[ I am posting this message for my friend who does not have access to the Usenet. Please answer to him directly by e-mail: FOK11@PLEARN.BITNET ] I have a 386/33 machine running ISC 2.02 Unix. It is in a small LAN consisting of a SUN Sparc1+ and PCs. I am a novice in 386 Unix world so please forgive if my problems are trivial. 1. 386 sees Sun disk through NFS. Unfortunately, when I attempt to change directory on the NFS disk, try to write a file and especially I use vp-ix on that disk, the command hangs and on Sun console the following message appears: rfs_read: attempt to read from non-file many, many times. This happens on a deeper level than the mounting point of the NFS-disk. From the opposite side, everything works fine and Sun sees 386 disk without any problems. 2. The 'batch' and 'at' commands don't work from the console and virtual terminals. When fail they return the message: Sh: Bad ulimit. However they do work when one is logged on either through rlogin or telnet (?!!!) 3. I can't configure 'rsh' and 'rexec' services properly. Although inetd is running, rshd + rexecd are uncommented in /etc/inetd.conf, hosts.equiv contains all necessary info, rsh form Sun (or PC) returns without any action; rexec gives the following output: Byte != 0 [1] we're goin in ... Login incorrect (though userid and password are correct for sure). Thank you in advance for any help. As we don't have access to the News please answer by e-mail. Michal Szymanski Warsaw University Observatory Al.Ujazdowskie 4 00-478 Warszawa POLAND e-mail: FOK11@PLEARN.BITNET * Origin: Seaeast - Fidonet<->Usenet Gateway - sunbrk (1:343/15.0)