karln@uunet.uu.net (05/31/91)
Thank you to all who answered my recent queries about gettinh hardware flow control to work on the serial port with ISC 2.2. The response has mostly been: Get the FAS Driver. After checking the FAQ I found out that everyone was indeed correct :-). Didn't realize I had the FAQ. Niether the FAQ or the respondants told me where I could get FAS, so Could anybody direct me to the lotcation of FAS. I can get it via internet or anybodies dialin of course. Thanks again for your help. Karl Nicholas karln%karln@uunet.uu.net karln!karln@uunet.uu.net uunet!karln!karln -- *********************************************************************** | Karl Nicholas | A recent Gallop Poll showed that 1 in 6 | | karln%karln@uunet.uu.net | Americans have spoken to a dead person. | ***********************************************************************
heiko@methan.chemie.fu-berlin.de (Heiko Schlichting) (06/01/91)
karln@uunet.uu.net writes: [...] > The response has mostly been: > > Get the FAS Driver. [...] > Could anybody direct me to the location of FAS. You can get the newest fas-driver (2.08) by anonymous FTP from methan.chemie.fu-berlin.de (130.133.2.81): pub/unix/driver/fas/fas208pl0.zoo (103051 Bytes) Bye, Heiko. -- |~| Heiko Schlichting | Freie Universitaet Berlin / \ heiko@fub.uucp | Institut fuer Organische Chemie /FUB\ heiko@methan.chemie.fu-berlin.de | Takustrasse 3 `---' phone +49 30 838-2677; fax ...-5163 | D-1000 Berlin 33 Germany