jtsillas@sprite.ma30.bull.com (James Tsillas) (06/06/91)
I have a 386 box running ISC 2.2 and wish to add a secondary controller. The current configuration consists of a primary IDE controller with a single drive (120MB). I wish to add a secondary RLL controller with a single drive (65 MB). THe IDE controller is built in to the mother-board. The RLL is a Western-Digital of recent make. The motherboard is a NEAT C&T 386SX with the Pheonix BIOS. I tried setting the RLL controller's I/O port to secondary but the Add-Disk script says it cannot find the controller. I also tried disableing the controller's on board BIOS with no luck. The RLL controller/drive combo has been tested to work as the primary controller/drive. Any help on this would be greatly appreicated. regards, -Jim. -- == James Tsillas Bull HN Information Systems Inc. == == (508) 294-2937 300 Concord Road 826A == == jtsillas@bubba.ma30.bull.com Billerica, MA 01821 == == == == The opinions expressed above are solely my own and do not reflect == == those of my employer. == -== no solicitations please ==-