fm@sigbr.sigcomp.sub.org (frieder monninger) (06/28/91)
We connected 2 disk drives - a seagate and a syquest to our esix 4.0 system. We use the adaptec 1542 controller. We installed esix on each drive and can boot and work with each drive without problems (the other one is physical connected but not mounted). As soon we mount the second drive and make a big cp the system hangs after some seconds. Some customers have the same problem - even when they use old-fashioned mfm drives at the same controller. Did you make similar experience - or (better !!) do you have some suggestions what we can do ? Esix suggested to check the terminators - but I have done this already some times .... (and both drives work but only alone ...) Frieder Monninger SIG Computer GmbH fm@sigcomp.sub.org D 6333 Braunfels +49 6472 2096