blue@TECHUNIX.TECHNION.AC.IL (Baruch Cochavy) (06/14/91)
I consider purchasing ODT 1.1 for my current 386SX machine. As I keep hearing about hardware compatibility problems, I was wondering weather I should expect any, given the following: 386SX MB. Uses Intel chip set (82335+82231+82230) 8MB memory Adaptec 1542B CP3200F (200MB, SCSI) 3 1/2", 1.44Mb floppy Hercules graphics card. I remember reading something about the Intel chip set causing trouble for 3.2.2 . Can anyone suggest any relevant information ? Thanks in advance, Baruch -- Baruch Cochavy | Disk space -- | blue@techunix.BITNET Technion | the final frontier ! | blue@techunix.technion.AC.IL Haifa 32000 | | phone: ISRAEL | | (972)-4-380337
basien@pemcom.pem-stuttgart.de (Tillmann A. Basien) (06/28/91)
blue@TECHUNIX.TECHNION.AC.IL (Baruch Cochavy) writes: >I consider purchasing ODT 1.1 for my current 386SX machine. As I keep >hearing about hardware compatibility problems, I was wondering weather >I should expect any, given the following: I think that there is no Problem in running ODT 1.1. But sometimes if you have cache memory you can run into trouble. The only way then is, to disable the cache memory. We have installed ODT on different maschines, all is running well until we enable cache memory on some nonames with more then 8Mbyte RAM. Tillmann -- basien@PEM-Stuttgart.de Dipl.-Ing. Tillmann A. Basien PEM Programmentwicklungsgesellschaft Vaihinger Str.49, PostBox 810165 fuer Microcomputer mbH FRG 7000 Stuttgart 80 voice: +49-711-713045 fax: +49-711-713047