bill@twg.bc.ca (Bill Irwin) (11/08/90)
I am trying to configure an Altos III (vt100 compatible, almost) and Wyse 60 with an ascii keyboard for use with VP/ix. I have a front-end script which changes the TERM variable from vt100 to vt100nam, but for the wyse60 it changes to wyse50n. When I invoke the VP/ix menu (ESC SO or ESC s) I get bad characters drawing the box that surrounds the menu. The vt100 prints "q"s and "x"s, while the wyse50nam prints all "."s. I have not been able to locate in TFM where the appropriate graphic characters are specified. In the file "/usr/vpix/term/wyse50n", the output characters mappings section has every line being mapped to a ".". The manual says to run a Wyse 60 as a wyse50 if it doesn't have an AT or 101 keyboard. Surely VP/ix should be able to draw a simple box menu with lines. There must be something simple I've overlooked, but I sure can't find it. Any ideas? -- Bill Irwin - The Westrheim Group - Vancouver, BC, Canada ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ uunet!van-bc!twg!bill (604) 431-9600 (voice) | UNIX Systems bill@twg.bc.ca (604) 430-4329 (fax) | Integration