ndsss@ihuxx.UUCP (Al R. Zantow) (11/01/84)
Currently the ACL repeater club, of which I am a member, has started to express intrest in getting a 6 Meter repeater on the air in addition to our 147.585 IN/146.985 OUT and 222.98 IN/224.58 OUT repeaters. I currently have a ICOM IC-25A and ICOM 2AT, which gives me plenty of 2M coverage, but no 6M or 220 coverage. What I am looking for is equipment and/or plans for a transverter to go from 2M to 6M, and from 2M to 220MHz. This would allow me to use all the features of the ICOM IC-25A (memory, scaning, ect) on two other bands. I have wanted to get on 220MHz and 6M, but I do not want to spend megabucks to do it [I would also like a receiver that covers D.C. to light for under $200 too :-) ]. I know there are other hardware freaks like me out there, I think this could be a nice challenge. If I can get plans, I would like to make a dual band transverter with a 2M input jack and outputs for 6M, 2M, and 220MHz. Please send me mail, or if you think this is of general intrest, post it on the net. TNX, KA9OST !ihuxx!ndsss 312-979-0458 work Al Zantow 1151 S. State St. Aurora, I.L. 60505
wheatley@inuxg.UUCP (Steven Wheatley) (11/01/84)
followups on transverters, both 2 meter and HF rig transverters, are indeed of interest to me also. Please either post or send me a copy. Thanks Steve Wheatley, KU9C inuxg!wheatley