paulm@ccicpg.UUCP (tmp Paul Moreau usenet acct) (08/02/90)
I have some 1 megabit RAMS that I would like to put in my ST to upgrade but I'm not sure iff they'll work. My question is: Which ones do I use and will my Hitachi HM51000-10 (100 ns) parts work ? I hope that there is somebody out there that has done thier own home brew megabit upgrades. I have done a home brew 256k bit upgrade to 1 meg but would now like to remove it and put the 1m bit chips in for 2.5 megs. WISH: If someone has done it with 51000, can you tell how to wire these puppies up ? THANX in ADVANCE, Paul Moreau. --- .==========================================================. | ### ####### ### | N O R T H | /==============\ | | ### ### ### | A M E R I C A |< An STC Company >| | ### ####### ####### | (was CCI) | \==============/ | |----------------------------------------------------------| | UUCP: ...ccicpg!dl2!paulm | Paul L. Moreau | | or ...ccicpg!dl1!paulm | Diagnostics Software Eng. | | or ...ccicpg!paulm | Irvine, California | `==========================================================' STC or is that Fujitsu now ?