ekrimen@ecst.csuchico.edu (Ed Krimen) (01/23/91)
jennie@ius2.cs.cmu.edu (Jennifer Kay) writes: - 1 ) Are the ST SIMMS "standard" ie. will 8 bit SIMMS from IBM dealers - work in the ST, and what speed should they be (80ns, 70ns, ...) ? Yes, the ST SIMMs are standard. You can use either 1megx8 (Mac SIMMs) or 1megx9 (IBM SIMMs) at 120ns or faster. - 2 ) Can a MultiSynch monitor (eg. NEC 2A) be hooked to an ST. - How (I don't have a multisynch yet so don't get too technical - - just an outline will be fine) ? - Will it display all three resolutions ? The NEC 2A won't work 'cause it's not a 'true' multisync. I'm using an NEC 3D right now. I know others who have used NEC II, Sony 1302, and many other models. There are some basic guidelines to the type of monitor you can use. -- Ed Krimen ............................................... ||| Video Production Major, California State University, Chico ||| INTERNET: ekrimen@ecst.csuchico.edu FREENET: al661 / | \ SysOp, Fuji BBS: 916-894-1261 FIDONET: 1:119/4.0
ekrimen@ecst.csuchico.edu (Ed Krimen) (01/24/91)
- >The NEC 2A won't work 'cause it's not a 'true' multisync. I'm using
- >an NEC 3D right now. I know others who have used NEC II, Sony 1302,
- >and many other models. There are some basic guidelines to the type
- >of monitor you can use.
- >
-
- Jennie, don't believe him! I have used Nec 2A with ST, and I still
- have that cable to do so available. The cable is made by Lindy and is
- available at least in Germany. But it is a quite easy one to make
- yourself too.
The reason I said it won't work with the ST is that a couple of people
told me that it won't sync when connected to the ST; therefore, I
didn't risk trying it out, since they know more about it than I. I
don't go around making these things up. :^) Do you get all three
resolutions with the 2a or just color or mono?
--
Ed Krimen ...............................................
||| Video Production Major, California State University, Chico
||| INTERNET: ekrimen@ecst.csuchico.edu FREENET: al661
/ | \ SysOp, Fuji BBS: 916-894-1261 FIDONET: 1:119/4.0s37837k@saha.hut.fi (Jari Lehto) (01/25/91)
In article <1991Jan23.185802.387@ecst.csuchico.edu> ekrimen@ecst.csuchico.edu (Ed Krimen) writes: > >The reason I said it won't work with the ST is that a couple of people >told me that it won't sync when connected to the ST; therefore, I >didn't risk trying it out, since they know more about it than I. I >don't go around making these things up. :^) Do you get all three >resolutions with the 2a or just color or mono? > >-- > Ed Krimen ............................................... > ||| Video Production Major, California State University, Chico > ||| INTERNET: ekrimen@ecst.csuchico.edu FREENET: al661 > / | \ SysOp, Fuji BBS: 916-894-1261 FIDONET: 1:119/4.0 All three resolutions. (of course there is a switch) One strange thing: The commercial cable doesn't have any audio-output... Jartsu *** Jari Lehto, jartsu@otax.hut.fi, s37837k@saha.hut.fi ***