Gor#f@mit-eddie.ARPA (02/28/85)
I have a friend who has acquired a Sugart 910 without manual. This drive does not have the usual 50 pin, 0.100" centers paddle. Instead it has a 44 pin, 0.156" centers connector (like those used on KIM-1s, the expansion port of VIC-20s, and commonly available at Radio Shack. There is a spot for the usual 9 pin power connector, but none is mounted, and the power etch does go to the edge connector, so I assume it is intended to get it's DC there too. Can anyone help us with the pinout? I don't relish the prospect of producing a schematic from staring at the etch. (Might be fun though, this thing is a real relic, there is only one analog IC on the board, the rest of the analog is done with descrete transistors, in metal cans no less.) tnx 73s -Bill, KE1G (for direct replies, use lll-crg!bedford!jinx#Gor#f, or f@lll-crg may also work.)