tim@animal.gcs.co.nz (Tim Frost) (12/05/90)
We have the following scenario: 1) PC's connected to UNIX boxes. 2) An X.25 network which includes the UNIX boxes and an IBM mainframe. 3) DDA software running on the mainframe and on the PC's. In an IBM environment, with the PC's connected to the mainframe using an Attachmate or IRMA board connected to a 3274 (or similar) controller, or via modem connection to the mainframe, it is possible for data to be transferred between the PC DDA and the mainframe DDA, without any special action by the user. Currently, clients connected via the UNIX hosts are using a solution which requires that the user initiate the transfer at the mainframe, then hot-key to DOS and run the transfer program for the PC end of the data transfer. Our aim is to make the data transfer occur automatically, in the background, in the same way as a transfer would occur using the IRMA board and direct link to the mainframe. Please mail responses, rather than posting them to the net. Tim Frost tim@animal.gcs.co.nz